top of page

Cross Border Trucking Malaysia to Thailand: Who Files What

Writer: Iman Yusoff
Iman Yusoff
Nov 3
8 min read

Updated: 6 days ago

A convoy of container trucks on a highway through green hills, Malaysia-Thailand border highway at Bukit Kayu Hitam, clear bright morning
Illustrative image.

What does cross border trucking from Malaysia to Thailand actually need? Two declarations, one on each side of the border. The Malaysian exporter files a K2 export declaration so the goods can leave, and the Thai buyer files an import entry so they can come in. The lorry is ready only when both sides hold papers that match.

The main road crossing is Bukit Kayu Hitam in Kedah, which meets Sadao on the Thai side. The paperwork splits cleanly: the seller's part, the buyer's part, and a few papers both sides read. Each part is below, with every paper in one table near the end.

The short version

  • Two declarations: the K2, filed in SMK by the Malaysian exporter or their agent, and a Customs Import Entry, filed by the Thai importer or their broker.

  • Road cargo crosses at Bukit Kayu Hitam and Sadao. A new road between the two customs complexes opened on 10 July 2026.

  • Strategic goods need a permit number on the K2. A wrong number gets the K2 refused.

  • Form D is optional. It's only for the ATIGA rate, and it moves electronically through the ASEAN Single Window.

  • Don't book the lorry until both sides' papers exist and match.

How does a lorry from Malaysia cross into Thailand?

Road cargo crosses at Bukit Kayu Hitam on the Malaysian side and Sadao on the Thai side. An Asian Development Bank programme note describes the two formal borders this way: Bukit Kayu Hitam and Sadao customs houses handle road cargo, while Padang Besar handles rail cargo on both sides.

It's a busy crossing. Thailand's Government Public Relations Department ranks Sadao–Bukit Kayu Hitam first among Thai–Malaysian checkpoints for traffic, and first among all of Thailand's border points for trade value.

The road itself changed this year. A new alignment linking the new Sadao customs complex with the Bukit Kayu Hitam complex officially opened on 10 July 2026, according to the same release and the Tourism Authority of Thailand. A lorry driver spoke to Bernama on the day the road opened to traffic. Under the old layout, he said, lorries and other traffic going into Danok used one road, which led to "severe congestion" (New Straits Times).

A better road doesn't fix paperwork, though. Each side still checks its own declaration, and the lorry waits for whichever side isn't ready.

What does the Malaysian exporter file before the lorry leaves?

The Malaysian side is the K2, Kastam No. 2, which the Royal Malaysian Customs Department titles "Declaration of Goods to be Exported". The form's own conditions say the exporter or appointed agent fills in items 1 to 54, and they name what goes with it:

  • any approval or permit another agency issues for those goods, where one applies;

  • the invoice;

  • the master bill where house bills of lading or air waybills are used;

  • any other document the customs officer asks for.

Two more conditions matter for a lorry. The goods can't leave customs control until the proper officer approves them. And the exporter or agent is liable for the validity of what's in the form and the attached documents. Box 4 records the mode of transport, with road as one option, and box 12 the country of final destination.

The K2 is filed electronically. RMCD's MyCIEDS page says customs forms are lodged in the Sistem Maklumat Kastam (SMK), and its FAQ says supporting documents, such as the invoice and packing list, go into MyCIEDS after the declaration.

The permit question that can bounce a K2

One step catches exporters out. RMCD's export procedure page says goods listed under the Strategic Trade (Strategic Items) Order 2010 need their permit before export. When the K2 is declared online, the exporter or forwarding agent ticks Yes or No for goods subject to that permit. Yes means a permit number, which SMK checks. A wrong number comes back as an error code, the K2 is refused, and the exporter or agent has to file it again.

So check whether your goods are on the list before the lorry is booked, not at the border. IFG covers the form itself in its guide to the K2 export declaration, and the wider steps in its guide to exporting from Malaysia.

What does the Thai buyer need ready?

The Thai side belongs to the importer. The US Commerce Department's Thailand country guide says Thai clearance starts with a Customs Import Entry, and that the entry goes in with the usual shipping papers: commercial invoice, packing list and transport document.

Some goods also need a Thai licence before they arrive. According to the same guide, a licence is needed to bring in many raw materials, as well as industrial machinery, textiles and agricultural items. For processed food, cosmetics, vitamins, medicines and medical devices, the licensing body is Thailand's Food and Drug Administration.

That's the buyer's job, or their broker's. Your job as the seller is to make sure your invoice and packing list give them what the entry needs, and to ask early whether your goods fall under a Thai licence. If the buyer has never imported this product before, that question comes first.

One gap to close with the buyer: the guide lists a bill of lading or air waybill, which are sea and air papers. A road load moves on a consignment note. Ask the buyer's broker which road document they want to see, and get it in writing before the load moves.

Which paper does each border ask for?

Here is the whole load on one page. Each row is a paper or step. The middle columns show what each border does with it. The last column shows what the official pages say can hold the load up. "Not stated" means they don't name anything, not that a mistake there is safe.

Paper or step

Who prepares it

Malaysian side

Thai side

What can stop the load

K2 export declaration

Malaysian exporter or appointed agent

Declared in SMK; items 1 to 54 filled

Not used

Goods stay under customs control until the officer approves

Commercial invoice

Malaysian seller

Attached to the K2; uploaded to MyCIEDS

Goes with the Customs Import Entry

Exporter or agent is liable for every entry

Packing list

Malaysian seller

MyCIEDS supporting document

Goes with the Customs Import Entry

Not stated

Road consignment note

Haulier

K2 records road as the mode of transport

Ask the broker which road document they need

Not stated

Strategic Trade Act permit, if listed

Malaysian exporter

Yes or No ticked on the K2; permit number checked by SMK

Not used

An invalid number means rejection and a fresh declaration

Other export permit or approval

Malaysian exporter

Attached to the K2 where the goods need one

Not used

Missing permit

Thai import licence, for controlled goods

Thai importer

Not used

Needed before import

Licence not in place

Customs Import Entry

Thai importer or broker

Not used

Required for clearance

Entry not ready when the lorry arrives

e-Form D, only if claiming the ATIGA rate

Malaysian exporter, through MITI's ePCO

Sent electronically through the ASEAN Single Window

Received electronically; a hardcopy may be rejected

Destination unable to receive the e-Form D

Border crossing

Haulier

Bukit Kayu Hitam

Sadao

Not stated

Read across any row and you can see who owns it. Watch the rows where each side might assume the other has it covered, such as the road transport document and the Thai licence. Getting the packing list and invoice right once serves both borders, and a clear description also helps whoever assigns the HS code.

Do you need Form D to send goods to Thailand?

No, not to clear the goods. Form D is the ATIGA proof of origin. The Thai buyer uses it to claim the preferential ATIGA duty rate on goods that meet the origin rules. Without it the goods can still be declared; the buyer just can't claim that rate on them.

If the buyer is counting on that rate, the Form D needs care, because it now travels electronically. MITI says in a 2020 announcement that it no longer issues paper-based Form D and that ATIGA Form Ds are transmitted through the ASEAN Single Window. The ASW box in the ePCO system is ticked and locked, because unticked boxes "caused unnecessary complications at the importing customs".

On the receiving side, Singapore Customs notes that every ASEAN member state has fully transmitted electronic Form D since 1 January 2024, and that a paper Form D presented at the importing end can be turned away. An earlier MITI notice also puts the onus on the exporter to make sure the destination port can receive the e-Form D.

When the system goes down

The electronic route has had gaps this year. MITI's certificate of origin page records a fault on Malaysia's ASW Gateway that began on 1 April 2026. Malaysia went back to paper Form D from 2 April, until electronic exchange was fully restored from 6 April. An earlier issue ran from 3 to 9 February 2026.

The practical habit: before a Form D load leaves, check MITI's announcements, and ask the Thai buyer to confirm their broker can see the e-Form D. IFG's guide to ATIGA Form D covers the application itself.

Can one truck carry the goods through on one declaration?

Sometimes. The ASEAN Customs Transit System (ACTS) lets an authorised trader move goods through the member states that take part, on one customs declaration backed by one customs guarantee, according to Singapore Customs. Malaysia and Thailand both take part.

It isn't automatic. Traders have to register first, and each truck used for an ACTS movement needs an ASEAN Goods Vehicle Cross-Border Permit that is still valid. For a one-off load, ask your forwarder whether ACTS applies rather than assume it does.

How do you prepare a load so it isn't held?

Work through this before you book the lorry:

  1. Agree with the Thai buyer who files the import entry, and get their broker's contact.

  2. Ask the buyer whether the goods need a Thai licence, and wait for a clear answer.

  3. Check whether the goods fall under the Strategic Trade Act list; if they do, get the permit number before the K2 is declared.

  4. Prepare one commercial invoice and one packing list, with the same description, quantity, weight and value on both.

  5. Ask the broker which road transport document they want, and give it to the haulier.

  6. If the buyer wants the ATIGA rate, apply for the Form D early, confirm it was sent through the ASEAN Single Window, and check MITI's announcements on the day.

  7. Book the lorry only when the K2 papers and the Thai entry papers both exist and say the same thing.

IFG's view is simple: fix the papers at the desk, before the lorry is booked. Goods stay under customs control until the officer approves them, so any fix made at the border is made while the lorry waits. Customs decides on every declaration, but you decide whether the papers agree.

Moving goods between Singapore and Malaysia instead? See IFG's guide to trucking from Singapore to Malaysia.

Send IFG your load details

Cross-border trucking between Singapore, Malaysia, Thailand and Indonesia is one of IFG's services, which also list low-bed trucks for oversized cargo and door-to-door logistics. Send your pickup town, the Thai delivery town, a cargo description, weight and dimensions, and the ready date to IFG on WhatsApp or email IFG. IFG replies about the lane and which papers each side needs. You can also use the contact page.

Malaysia to Thailand trucking: common questions

Is Form D compulsory for Malaysia to Thailand trucking?

No. The goods are cleared on the K2 in Malaysia and the import entry in Thailand. Form D only matters when the Thai buyer wants to claim the ATIGA preferential rate on goods that meet the origin rules. If they do, it travels as an e-Form D through the ASEAN Single Window, and a paper copy can be turned away at the Thai end.

Who files the Thai import declaration?

The Thai importer, or a broker acting for them. The Malaysian seller's part is the K2 and the papers both sides read: the commercial invoice, packing list and transport document. Agree early who the buyer's broker is, so your papers reach the right person before the lorry is booked.

Which border crossing do lorries use?

Road cargo crosses at Bukit Kayu Hitam in Kedah and Sadao in Songkhla. A new road alignment linking the two customs complexes opened on 10 July 2026. Rail cargo uses Padang Besar instead. This guide doesn't cover cargo hours, so confirm them with your haulier.

Customs forms, systems and announcements change. This guide follows the RMCD, MITI and other official pages linked above, as they stood on 19 October 2026. Check current requirements with RMCD, MITI or the Thai buyer's broker before you ship.

Content production support: SingRank, an SEO and AI search (GEO) agency in Singapore.

Comments


bottom of page